LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Overhaul >> NIPPONDENSO 10PA20 Shaft Seal R & I >> Removal

NIPPONDENSO 10PA20 Shaft Seal R & I: Removal

  1. Discharge system using approved refrigerant recovery/recycling equipment and remove compressor. Drain oil from compressor and record amount for reassembly.
  2. Remove clutch assembly. See NIPPONDENSO 10PA20 CLUTCH ASSEMBLY R & I. Remove front head retaining bolts. Separate front head and "O" ring from compressor. See Figure .
  3. Remove felt dust seal and dust seal retainer from front head. Remove shaft seal retaining snap ring. Press seal from front head.
scientia non olet · About LEMON Manuals