LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1990 >> Value Van 6.2 J, Automatic, 475/M40 >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Suspension - Front (AWD & 4WD)) >> Removal & Installation >> Lower Control Arm >> Removal (Bravada, Jimmy, Sonoma, Syclone, Typhoon & "T" Series Blazer & Pickup)

Removal (Bravada, Jimmy, Sonoma, Syclone, Typhoon & "T" Series Blazer & Pickup)

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1992 Oldsmobile Bravada, 1992 GMC Yukon, 1992 GMC Suburban, 1992 GMC Sonoma, and 1992 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Unload torsion bar tension. See Figure . Count exact number of tool turns for reassembly reference. Slide, but DO NOT remove, torsion bar forward. Remove wheel and tire assembly.
  2. Remove stabilizer bar from vehicle. See STABILIZER BAR  under REMOVAL & INSTALLATION. Remove shock absorber from vehicle. See SHOCK ABSORBER  under REMOVAL & INSTALLATION. Separate lower ball joint from steering knuckle. See LOWER BALL JOINT  under REMOVAL & INSTALLATION.
  3. Remove lower control arm pivot bolts, nuts and washers. Remove lower control arm from vehicle. See Figure . Replace bushings and/or bumper as necessary.
scientia non olet · About LEMON Manuals