LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1990 >> S15 Jimmy RWD, Automatic, 700R4/MD8 >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front (4WD) - Torsion Bar >> Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

  1. Install new insulator bushings on stabilizer bar (with split toward front) and brackets onto bushings. Position bar and partially start lower control arm bracket mounting bolts.
  2. Install frame bracket mounting bolts and tighten to specification. Tighten remaining mounting bolts. See TORQUE SPECIFICATIONS  table at end of this article. To complete installation, reverse removal procedure. Reset riding height. See Figure and Figure .
scientia non olet · About LEMON Manuals