Hydraulic Brake Bleeding
NOTE:
On vehicles with ABS, wait 15 seconds between pedal strokes when bleeding brake system. On vehicles with Hydro-Boost, check for air bubbles in power steering fluid reservoir. If air bubbles are present, bleed Hydro-Boost system before bleeding brake system. See HYDRO-BOOST BLEEDING .
Hydraulic system bleeding is necessary any time air has been introduced into system. Bleed brakes at all 4 wheels if master cylinder lines have been disconnected or master cylinder has been run dry. Bleed brakes with pressure bleeding equipment or by manually pumping brake pedal while using bleeder tubes.
Hydro-Boost bleeding involves bleeding power steering system as well as brake system.