Upper & Lower Ball Joints ("C" Series)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC S15 Pickup, 1990 GMC S15 Jimmy, 1990 GMC Pickup, 1990 GMC Cab & Chassis, and 1990 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle with a jack stand near lower ball joint. Place a dial indicator on spindle hub.
- Pry tire and wheel assembly up and down and note dial indicator reading. If reading exceeds .08" (2.0 mm), replace loose ball joint.