LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1989 >> Value Van P3500, 4.8 T, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L (305") V8 - VIN [H] >> Removal & Installation >> Front Cover >> Installation

Front Cover: Installation

  1. Install gasket on front cover with gasket sealer. Install cover on engine block and timing tab (if equipped). Tighten bolts to specification. Install vibration damper using damper puller/installer.
  2. Before installing vibration damper retaining bolt, apply small amount of RTV sealant at crankshaft Woodruff key and vibration damper. Install retaining bolt. Tighten to specification. Reverse removal procedure to install remaining components. Tighten bolts to specification.
scientia non olet · About LEMON Manuals