LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1989 >> Value Van P3500, 4.8 T, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L (305") V8 - VIN [H] >> Lubrication >> Oil Pan Removal >> 2WD

Oil Pan Removal: 2WD

  1. Disconnect negative battery cable. Drain engine oil and cooling system. Remove engine. Remove oil pan attaching hardware. Remove oil pan. Clean all gasket mating surfaces and straighten sealing flange.
  2. When installing, apply thin coat of RTV sealer to entire oil pan sealing flange. Align holes of gasket on block and install oil pan.
scientia non olet · About LEMON Manuals