LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1989 >> Value Van P3500, 4.8 T, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L (305") V8 - VIN [H] >> Engine Specifications >> Cylinder Block Specifications

Cylinder Block Specifications

CYLINDER BLOCK SPECIFICATIONS

Application In. (mm)
Max. Block Warp .004 (.10)
Cylinder Bore
Standard Diameter 3.7350-3.7385 (94.869-94.957)
Maximum Taper (1) .0005 (.012)
Maximum Out-of-Round (2) .0002 (.005)
(1) Specification is for thrust side. Relief side is .001" (.03 mm).
(2) Production specification is given. Maximum service specification is .001" (.03 mm).
scientia non olet · About LEMON Manuals