LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1989 >> Forward Control 7.4 W, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard & Electronic >> Testing >> Electronic Instrument Cluster Test >> Cluster Display Does Not Light ("S" Series)

Cluster Display Does Not Light ("S" Series)

  1. Check for ignition feed to cluster, and for an inoperative cluster. To do so, disconnect large 34-pin connector from cluster. Using a digital volt/ohmmeter, measure voltage from pin "A15" to pin "B7" with ignition switch in "RUN" position. See Figure .
  2. Digital volt/ohmmeter should read battery voltage. If meter reads less than battery voltage or zero, repair Pink/White wire from ignition. If ignition feed circuit is okay, replace inoperative instrument cluster.
scientia non olet · About LEMON Manuals