LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1987 >> Pickup V2500, 4.8 T >> Labor Times >> Other Variant >> Drivelines and Axles >> Axle Shafts - Rear >> Pinion Shaft Seal >> Remove & Replace

Pinion Shaft Seal: Remove & Replace

WARNING: This page is about the Pickup R1500, 4.3 Z, Automatic, 400/M40, which is a different variant/trim than selected.
Applies ToNoteStandard HoursWarranty HoursSkill Level
Full Floating Axle1.8B
Semi-Floating Axle1.2B
Combination Procedure: SPACER CRUSH SLEEVE: Replace:
Full Floating Axle1.6B
Semi-Floating Axle2.0B
scientia non olet · About LEMON Manuals