Clutch Pressure Plate: Remove & Replace
WARNING: This page is about the Pickup R1500, 4.3 Z, Automatic, 400/M40, which is a different variant/trim than selected.
Includes: Replace Clutch Disc and adjust Pedal free play. DOES NOT include resurface Flywheel.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3 Spd Trans | 3.3 | 1.8 | C | |
| Additional Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| w/Power Take-Off add | 0.4 | C | ||
| w/Skid Plate add | 0.4 | 0.4 | C | |
| Where Catalytic Converter interferes add | 0.4 | C | ||
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||