LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1986 >> Safari Van M V6-262 4.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Subassembly Service >> Warner T-4C 4 Speed >> Synchronizer Keys & Springs

Synchronizer Keys & Springs

REPLACE

NOTE: The synchronizer hubs and sliding sleeves are a selected assembly and must be kept together as originally assembled, however, the keys and springs may be replaced if worn or broken.

1. Mark relation of hub and sleeve for reference during assembly.

2. Push sliding sleeve from hub and remove keys and springs.

3. Install sliding sleeve on hub, aligning the marks made previously.

4. Place a blocker ring on side of hub and sleeve and install keys and a spring. Then place blocker ring on opposite side of hub and sleeve and install remaining spring.
scientia non olet · About LEMON Manuals