LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1986 >> Jimmy 6.2 C >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L (305") V8 - VIN [H] >> Removal & Installation >> Water Pump >> Installation

Water Pump: Installation

Clean all gasket surfaces. Apply 1/8" bead silicone sealer to water pump gasket surfaces. Using new gaskets, install and tighten water pump. Install remaining components in reverse order of removal.

NOTE: For further information on cooling systems, see ENGINE COOLING SYSTEM article in the ENGINE section.
scientia non olet · About LEMON Manuals