Power Steering Pump
WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 1986 Jeep Wagoneer, 1986 Jeep Pickup, 1986 Jeep Grand Wagoneer, 1986 Jeep Comanche, and 1986 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Loosen pump adjusting bolt (or nut) and pump mounting bolts, then withdraw pump drive belt. Disconnect pressure and return hoses from pump and cap ends to prevent loss of fluid and entry of dirt.
Remove bolts attaching pump mounting bracket to engine, and withdraw pump, pulley and mounting bracket as an assembly. To install, reverse removal procedure and bleed hydraulic system.