LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1983 >> Forward Control 5.7 M, Automatic, 400/M40 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Coat camshaft lobes with Molykote (or equivalent), and coat journals with engine oil. Install camshaft. Temporarily place camshaft sprocket on camshaft and align timing marks. Install camshaft sprocket and chain. Tighten camshaft sprocket attaching bolts.
  2. Lubricate timing chain with engine oil. When a new camshaft is installed, always install new lifters, and change oil and filter. Install remaining components. Adjust valves.
scientia non olet · About LEMON Manuals