LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1983 >> Forward Control 5.7 M, Automatic, 400/M40 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Water Pump Removal - V8 >> Removal & Installation >> 5.0L & 5.7L Water Pump >> Installation

5.0L & 5.7L Water Pump: Installation

Clean all gasket surfaces. Apply 1/8" bead silicone sealer to water pump gasket surfaces. Using new gaskets, install and tighten water pump. Install remaining components in reverse order of removal.

NOTE: For further information on cooling systems, refer to the COOLING SYSTEM SPECIFICATIONS article in the ENGINE COOLING section.