LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1983 >> Forward Control 5.7 M, Automatic, 400/M40 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. Position master cylinder on vehicle and install cylinder retaining bolts. Connect front and rear hydraulic brake lines to cylinder.
  2. Connect brake pedal push rod, if removed. Fill reservoir with clean brake fluid, and bleed hydraulic system. See HYDRAULIC BRAKE BLEEDING.
scientia non olet · About LEMON Manuals