LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1983 >> Forward Control 5.7 M, Automatic, 400/M40 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Disc Rotor >> Removal (2WD Models)

Removal (2WD Models)

  1. Raise vehicle and support with safety stands. Remove brake caliper (do not disconnect brake line).
  2. Remove grease cover from end of hub. Remove cotter pin nut, washer, and outer bearing. Remove rotor and hub assembly.