LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1983 >> Forward Control 5.7 M, Automatic, 400/M40 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Master Cylinder - DELCO Quick Take-Up >> Reassembly

Master Cylinder - DELCO Quick Take-Up: Reassembly

  1. Lubricate new reservoir grommets with silicone brake lube and press into master cylinder. Make sure grommets are properly seated. Lay reservoir on flat, hard surface.
  2. Rock master cylinder body onto reservoir until completely seated. Lubricate new piston seals and install on secondary piston, with lip of seals towards ends of piston. Install spring retainer.
  3. Install secondary piston spring and secondary piston assembly in master cylinder. Lubricate primary piston seals with clean brake fluid.
  4. Install primary piston in master cylinder. Press in piston and install snap ring. Fit diaphragm in reservoir cover and install cover.
scientia non olet · About LEMON Manuals