LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1982 >> Magnavan Standard Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> SPICER (DANA) Full-Floating Axles >> Removal & Installation >> Front Axle Shafts & Bearings >> Removal Jeep "CJ" & Scrambler

Removal Jeep "CJ" & Scrambler

  1. Raise vehicle and position on safety stands. Remove wheel and tire. If equipped with locking hubs, see removal and installation instructions on Locking Hubs and 4-Wheel Drive Steering Knuckles in appropriate articles in this section. 
  2. Remove disc brake caliper. Remove bolts attaching front hub to axle and remove hub body. Remove retaining ring from axle shaft. Straighten lip of lock washer. Remove outer lock nut, lock washer, inner lock nut, and tabbed washer.
  3. Remove lock nut. Remove outer bearing and remove disc brake rotor. Remove axle spindle. Remove axle shaft and universal joint assembly.
scientia non olet · About LEMON Manuals