"CJ" and "Scrambler" Models
Install inner lock washer and adjusting nut. Tighten nut to 50 ft.lbs. while rotating rotor. Now back off nut 1/3 turn. Install outer lock washer and nut. Tighten nut to 50 ft.lbs. Bend lock washer lip over nut.
Install inner lock washer and adjusting nut. Tighten nut to 50 ft.lbs. while rotating rotor. Now back off nut 1/3 turn. Install outer lock washer and nut. Tighten nut to 50 ft.lbs. Bend lock washer lip over nut.