LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1981 >> Magnavan Standard Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Wheel Bearing Adjustment - Front Wheel Bearing >> Adjustment >> Ford Motor Co. >> Bronco and Fl 50/350 Models 4-WD

Bronco and Fl 50/350 Models 4-WD

Tighten adjusting nut to 50 ft.lbs. while rotating rotor. Back nut off 90°. Install locking nut and tighten to 50-80 ft.lbs. Final end play should be.001-.010" (.001-.008" for F250 4-WD with Spicer (Dana) 44-9F Axle).

scientia non olet · About LEMON Manuals