LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1981 >> Magnavan Standard Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> SPICER (DANA) Semi-Floating Axles >> Removal & Installation >> Pinion Yoke & Seal >> Removal

Pinion Yoke & Seal: Removal

  1. Disconnect drive shaft and scribe a line down pinion shaft, yoke and nut. Remove nut using tool (J-8614-01) and yoke using tool (J-8614).
    CAUTION: Do not hammer yoke off. Damage to pinion gear, ring gear and bearing could result.
  2. Pry seal from bore using care not to damage machined surfaces.
scientia non olet · About LEMON Manuals