LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1981 >> Magnavan Standard Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axles - SPICER (DANA) Full-Floating Front & Rear Axles >> Removal & Installation >> Pinion Flange & Seal >> Removal

Pinion Flange & Seal: Removal

Disconnect drive shaft, and scribe a line down pinion shaft, flange and nut. Remove nut, and using suitable tool, remove flange. Pry seal from bore using care not to damage machined surfaces.

CAUTION: Do not hammer flange off. Damage to pinion gear and bearing could result.
scientia non olet · About LEMON Manuals