Crankshaft Main Oil Seal: Remove & Replace
WARNING: This page is about the Suburban C1500, Automatic Trans, which is a different variant/trim than selected.
Includes: Pack and add only for Upper Rope Seal. If necessary to replace Upper Rope Seal, use Crankshaft - R&R.
NOTE: The manufacturer has determined that replacement rope and split lip type seals may be ineffective in early 1.8L, 2.0L Four and 2.8L V6 engines. Please read tariff notes carefully.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| C1500,V8,Gas,Automatic Trans, Rear | 2.0 | B | ||
| Additional Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| V8, w/Engine Oil Cooler add | 0.3 | 0.3 | B | |
| w/Skid Plate add | 0.3 | B | ||
| Where Cruise Control interferes add | 0.2 | B | ||
| Where Elect Eng System interferes add | 0.5 | B | ||