Wiper Motor: Installation
Reverse removal procedure while noting the following: Wiper motor must be in park position when installed. Holes in grille tabs at rear edge of grille must engage cowl lugs.
| Application | 1-Speed | 2-Speed | |
|---|---|---|---|
| Current Draw (Amps.) | |||
| No Load (Max.) | 3.0 | 3.6 | |
| Dry Windshield (Max.) | 3.5 | 4.5 | |
| Stall (Max.) | 11.0 | 12.0 | |
| Crank Arm Speed (RPM-No Load) | |||
| Low Speed (Min.) | 34 | ||
| High Speed (Min.) | 65 | ||