Rear Wheels (GMC Motor Home)
Tighten wheel bearing adjusting nut to 25-30 ft. lbs. Back off adjusting nut, then retighten nut finger tight. Loosen nut 1/12-1/6 turn, and install cotter. Check that final end play is 0.001 - 0.005".
Tighten wheel bearing adjusting nut to 25-30 ft. lbs. Back off adjusting nut, then retighten nut finger tight. Loosen nut 1/12-1/6 turn, and install cotter. Check that final end play is 0.001 - 0.005".