1967-72 All Models (Exc. 1967 P-20 & 30)
Disconnect battery ground and remove steering wheel assembly, preload spring and cancelling cam. Remove shift lever roll pin and shift lever (if necessary). Remove directional signal lever screw and lever. Push in hazard warning knob, remove retaining screw and knob.
NOTE:
Hazard switch knob must be pushed in to prevent damage to switch when removing from switch cover.
Disconnect switch wiring from chassis harness at multiple connector under instrument panel. Remove mast jacket upper bracket and switch wiring cover from column. Remove switch mounting screws, switch, bearing housing, switch cover and shift housing from column. To install, reverse removal procedure.