LEMON Manuals: Even more car manuals for everyone
Home >> Freightliner >> 2007 >> Sprinter 2500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Steering and Suspension >> Relays and Modules - Steering and Suspension >> Relays and Modules - Wheels and Tires >> Tire Pressure Monitor Receiver / Transponder >> Service and Repair >> Installation >> Rear

Rear






REAR




1. Reconnect the electrical connector (2) to the transponder (3).
2. Install the transponder (3) into the cover (1).




3. Install the transponder mounting bracket only if removed. Tighten the nuts to 3 Nm (25 in.lbs.).
4. Install the transponder with cover (3) to the body and install the mounting screws (1). Tighten the screws to 3 Nm (25 in.lbs.).
5. Lower the vehicle.
scientia non olet · About LEMON Manuals