LEMON Manuals: Even more car manuals for everyone
Home >> Freightliner >> 2007 >> Sprinter 2500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Steering and Suspension >> Relays and Modules - Steering and Suspension >> Relays and Modules - Wheels and Tires >> Tire Pressure Monitor Receiver / Transponder >> Service and Repair >> Installation >> Front

Front






FRONT




1. Reconnect the electrical connector (2) to the transponder (3).
2. Install the transponder (3) into the cover (1).




3. Install the transponder with the cover (3) onto the frame rail (1). Tighten the nuts to 3 Nm (25 in.lbs.).
4. Install the front part of the wheel well housing cover.
5. Lower the vehicle.
scientia non olet · About LEMON Manuals