LEMON Manuals: Even more car manuals for everyone
Home >> Freightliner >> 2007 >> Sprinter 2500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Diagrams >> Diagram Information and Instructions >> Service Procedures >> Diode Replacement >> Removal

Removal






REMOVAL










1. Disconnect the battery.
2. Locate the diode in the harness, and remove the protective covering.
3. Remove the diode from the harness, pay attention to the current flow direction (1) (2) (3).

scientia non olet · About LEMON Manuals