LEMON Manuals: Even more car manuals for everyone
Home >> Freightliner >> 2007 >> Sprinter 2500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Rear Crankshaft Main Bearing Seal >> Service and Repair >> Removal

Removal






REMOVAL




1. Remove the transmission.
2. Remove the bolts holding the flex plate to the crankshaft (3).
3. Remove the flex plate.
4. Remove the bolts holding the rear main seal carrier (1) to the engine block and oil pan.
5. Remove the rear main seal carrier (1) from the engine block and oil pan.
6. Clean sealant residue from the engine block and oil pan.
scientia non olet · About LEMON Manuals