LEMON Manuals: Even more car manuals for everyone
Home >> Freightliner >> 2007 >> Sprinter 2500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair >> Removal and Replacement >> Hydraulic Lifters - Installation

Hydraulic Lifters - Installation






INSTALLATION





CAUTION: When the hydraulic lash adjusters are removed from the engine, they must be stored upright and in clean conditions. Install the finger followers and hydraulic lifters in the same location as removed.

CAUTION: Replacement of the camshaft will also require replacement of the finger followers and hydraulic lifters.

1. Assemble the hydraulic lifter (2) to the rocker arm (1) with the retaining clip (3).
2. Install the rocker arm and lifter assembly onto the cylinder head.
3. Install the camshaft(s).
scientia non olet · About LEMON Manuals