Driver Heated Seat Switch

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the gear selector bezel trim.
3. Remove the storage bin.
4. Remove the switch bezel retaining screw and remove the switch bezel from the instrument panel.
5. Disconnect electrical connections.
6. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location in the switch bezel.

INSTALLATION
1. Install the heated seat switch in its mounting location in the switch bezel.
2. Connect electrical connections.
3. Position the switch bezel and install the retaining screw.
4. Install the storage bin.
5. Install the gear selector bezel trim.
6. Connect the negative battery cable.