System Diagram - Gauges
| Item | Description |
|---|---|
| 1 | SOBDMC |
| 2 | BECM |
| 3 | GWM |
| 4 | IPC |
| 5 | Battery charge gauge |
| 6 | Power gauge (China) |
Network Message Chart - Gauges
The data on each gauge is displayed when the IPC receives messaged inputs from other modules on the CAN. The IPC communicates on the HS-CAN3. If the originating module communicates on a network other than the HS-CAN3, the messaged signals are sent to the GWM first, then to the IPC.
| Gauge | Network Message | Originating Module | Originating CAN | Receiving Module |
|---|---|---|---|---|
| Battery Charge | Battery state of charge data | BECM | HS-CAN1 | IPC |
| Battery power available | SOBDMC | FD-CAN | ||
| Power Gauge (China only) | Battery state of charge data | BECM | HS-CAN1 | IPC |
| Battery power available | SOBDMC | FD-CAN |