Turbocharger Coolant Supply Tube: Installation
- Install a new turbocharger coolant tube O-ring seal. Lubricate the new O-ring seal and the tube sealing surface with clean engine coolant. Refer to Specifications
.
-
NOTE: Do not use a metal brush, damage to sealing area will result in leaks.
- Carefully use a nylon brush to remove the old O-ring residue, use brake cleaner to rinse the O-ring residue out of the turbocharger tube O-ring bore. Inspect the area for deep scratches and gouges. Install new components if needed.
Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
- Fit the lower turbocharger coolant supply tube to the turbocharger. The lower coolant supply tube goes into the turbocharger first.
- Carefully use a nylon brush to remove the old O-ring residue, use brake cleaner to rinse the O-ring residue out of the turbocharger tube O-ring bore. Inspect the area for deep scratches and gouges. Install new components if needed.
- Install the turbocharger coolant return tube. Refer to Turbocharger Coolant Return Tube .