Pinpoint Test M: Noise, Vibration, Harshness

WARNING: This page is about a different variant/trim than selected.

Normal Operation and Fault Conditions
- Noise
  - Check the engine drive accessories, suspension, CV joints and transmission fluid cooler tubes. REFER to: Noise, Vibration and Harshness (NVH) .
- Vibration
  - Check the engine drive accessories, suspension, CV joints and transmission fluid cooler tubes. REFER to: Noise, Vibration and Harshness (NVH) .
  - Inspect the park pawl and the park pawl actuator for damage or wear. REFER to: TRANSMISSION
Possible Causes
- CV Joint
- Engine drive accessories
- Suspension
- Transmission fluid cooler tubes
- Internal transmission components
Diagnostic steps are not provided for this symptom or DTC. REFER to: DIAGNOSTIC METHODS