LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> Escape ST-Line Hybrid >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 2.5L DURATEC - Hybrid (121KW 164PS) (BG) >> Removal And Installation >> Coolant Pump >> Installation

Coolant Pump: Installation

  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03 Engine Cooling - 2.5L Duratec - Hybrid (121kW/164PS) (S3)).
  3. Road test the vehicle.
scientia non olet · About LEMON Manuals