LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> Escape ST-Line Hybrid >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 2.5L DURATEC - Hybrid (121KW 164PS) (BG) >> Diagnosis And Testing >> Engine Cooling >> Symptom Chart

Symptom Chart

Diagnostics in This information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Condition  Actions 
Loss of coolant GO to Pinpoint Test A 
The engine overheats GO to Pinpoint Test B 
The engine does not reach normal operating temperature GO to Pinpoint Test C 
The block heater does not operate correctly (if equipped) Check continuity in all 3 power cable circuits. If any circuit measures more than 5 ohms, install a new power cable.
Check the resistance of the block heater. If the resistance does not measure between 30 and 40 ohms, install a new block heater. REFER to: Block Heater .
The electric cooling fan is inoperative in one or more speeds or does not operate correctly REFER to: Cooling Fan Control .
The electric cooling fan stays on all the time REFER to: Cooling Fan Control .
The electric coolant pump failure GO to Pinpoint Test E 
scientia non olet · About LEMON Manuals