LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> Escape Active, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 8-Speed Automatic Transmission - 8F35/8F40 (Diagnosis & Testing 2.0L - Diagnosis By Symptom) >> Diagnosis And Testing >> DTC Chart and Pinpoint Tests - 2.0L EcoBoost (184kW/250PS) - MI4 >> Pinpoint Tests >> Pinpoint Test AE: DTC P1783 >> Pinpoint Test AE: DTC P1783

Pinpoint Test AE: DTC P1783

  1. Normal Operation and Fault Conditions 

    The PCM monitors transmission temperature and if it exceeds normal operating temperatures it sets a DTC. It may even limit powertrain torque to prevent damage to the transmission.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM P1783:00 Transmission Overtemperature Condition: No Sub Type Information Sets in continuous memory and during the on-demand self-test when the PCM detects an transmission overheating concern and may limit torque to prevent critical transmission overheating. The DTC P0218 may set in conjunction with DTC P1783.

    Possible Causes 

    • Transmission overheating concern

  2. AE1 RECHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.

    • Using a diagnostic scan tool, clear the DTC s for the PCM.

    • Road test the vehicle.

    • Using a diagnostic scan tool, carry out the PCM self-test.

    Is DTC s P1783 still present? 

    Yes  If any TFT sensor circuit DTC s are present, resolve those first. If only DTC P1783 returns, REFER to: TRANSMISSION COOLING .
    No  The system is operating correctly at this time. The DTC may have been set due to an extreme driving condition.
scientia non olet · About LEMON Manuals