Engine Cooling - 2.7L ECOBOOST (238KW 324PS): Specifications
Lubricants, Fluids, Sealants and Adhesives Vehicles Built On Or Before: 07-July-2019
| Name | Fill Capacity |
|---|---|
| Material : Antifreeze (WSS-M97B44-D) |
Initial fill - 11. 7L (12. 4 qt) / With auxiliary heater core -- 13. 6L (14. 4 qt) |
| Material : Antifreeze (WSS-M97B44-D2) |
Initial fill - 11. 7L (12. 4 qt) / With auxiliary heater core -- 13. 6L (14. 4 qt) |
Lubricants, Fluids, Sealants and Adhesives Vehicles Built On Or After: 08-July-2019 and all service
| Name | Fill Capacity |
|---|---|
| Material : Antifreeze (WSS-M97B57-A1) |
Initial fill - 11. 7L (12. 4 qt) / With auxiliary heater core -- 13. 6L (14. 4 qt) |
| Material : Antifreeze (WSS-M97B57-A2) |
Initial fill - 11. 7L (12. 4 qt) / With auxiliary heater core -- 13. 6L (14. 4 qt) |
| Material : Cooling System Flush (ESR-M14P7-A) |
- |
Antifreeze
| Percent Antifreeze/Coolant to Distilled Water | Freeze Protection |
|---|---|
| 42/58 | -26deg. C |
| 58/42 (Extreme Cold Climates) | -50deg. C |
Lubricants, Fluids, Sealants and Adhesives
| Name | Specification | Fill Capacity |
|---|---|---|
| Cooling System Flush | ESR-M14P7-A | - |
Cooling System Pressure
| Complete cooling system maximum pressure | 145 kPa (21 psi) |
|---|---|
| Pressure relief cap | 145 kPa (21 psi) |
| Radiator pressure test (removed from the vehicle) | 138 kPa (20 psi) |
Thermostat Opening Temperatures
| Starts to open | 87. 5deg. C (190deg. F) |
|---|---|
| Fully open | 100deg. C (212deg. F) |