Engine Cooling - 2.0L ECOBOOST (184KW/250PS) - Mi4: Specifications
Lubricants, Fluids, Sealants and Adhesives Vehicles Built On Or Before: 07-July-2019
| Name | Fill Capacity |
|---|---|
| Material : Antifreeze (WSS-M97B44-D) |
Initial fill - 9.2L (9.7 qt) / With auxiliary heater core -- 9.8L (10.4 qt) |
| Material : Antifreeze (WSS-M97B44-D2) |
Initial fill - 9.2L (9.7 qt) / With auxiliary heater core -- 9.8L (10.4 qt) |
Lubricants, Fluids, Sealants and Adhesives Vehicles Built On Or After: 08-July-2019 and all service
| Name | Fill Capacity |
|---|---|
| Material : Antifreeze (WSS-M97B57-A1) |
Initial fill - 9.2L (9.7 qt) / With auxiliary heater core -- 9.8L (10.4 qt) |
| Material : Antifreeze (WSS-M97B57-A2) |
Initial fill - 9.2L (9.7 qt) / With auxiliary heater core -- 9.8L (10.4 qt) |
| Material : Cooling System Flush (ESR-M14P7-A) |
- |
Antifreeze
| Percent Antifreeze/Coolant to Distilled Water | Freeze Protection |
|---|---|
| 42/58 | -26deg.C |
| 58/42 (Extreme Cold Climates) | -50deg.C |
Cooling System Pressure
| Complete cooling system maximum pressure | 145 kPa (21 psi) |
|---|---|
| Pressure relief cap | 145 kPa (21 psi) |
| Radiator pressure test (removed from the vehicle) | 138 kPa (20 psi) |
Thermostat Opening Temperatures
| Starts to open | 87deg.C (188.6deg.F) |
|---|---|
| Fully open | 100deg.C (212.0deg.F) |