LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Engine Ignition - 3.5L DURATEC (202KW/275PS)) >> Removal And Installation >> Ignition Coil-On-Plug >> Installation

Ignition Coil-On-Plug: Installation

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

Both sides 

  1. Replace any ignition coil-on-plug rubber boots with cracks, rips or tears.
    GFD839066Courtesy of FORD MOTOR COMPANY
    • Install the ignition coil-on-plugs.

    • Install the ignition coil-on-plug bolts.

      Torque: Stage 1: 7 Nm

      Stage 2: 50deg.

    • Connect the ignition coil-on-plug wiring harness electrical connectors.

    GFD839065Courtesy of FORD MOTOR COMPANY

    RH (right-hand) side 

  2. Install the upper intake manifold. Refer to: Upper Intake Manifold .