LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine - 3.5L DURATEC (202KW/275PS)) >> Removal And Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the crankshaft front seal bore with clean engine oil.
    GFD838340Courtesy of FORD MOTOR COMPANY
  2. Using the special tools, install the crankshaft front seal.Use Special Service Tool: 303-1531 Installer, Front Crank Seal and Damper., 303-1251 Installer, Front Seal.
    GFD838341Courtesy of FORD MOTOR COMPANY
  3. Install the crankshaft pulley. Refer to: Crankshaft Pulley 
  4. Use the Powertrain Control Module (PCM) Misfire Monitor Profile Correction routine in the diagnostic scan tool.
  5. Road test the vehicle.
scientia non olet · About LEMON Manuals