Network Message Chart - Indicators and Reconfigurable Telltales (RTTs)
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| ABS warning indicator request | ABS module | Input used to control the ABS warning indicator. |
| Airbag indicator request | RCM | Input used to control the airbag warning indicator. |
| Auto high beam status display | IPMA | Input used to control the auto high beam RTT indicator. |
| Body service required | BCM | Input used to control the powertrain malfunction (wrench) indicator. |
| Brake (red) warning indicator request | ABS module | ABS input used to control the brake warning indicator. |
| Brake fluid level warning | BCM | Brake fluid level input used to control the brake warning indicator. |
| Charging system indicator request | BCM | Input used to control the flashing of the charging system warning indicator. |
| Cross traffic alert sensor status-left | SODL | Input used to control the BLIS / CTA warning indicator. |
| Cross traffic alert sensor status-right | SODR | Input used to control the BLIS / CTA warning indicator. |
| Cross traffic alert status-left | SODL | Input used to control the BLIS / CTA warning indicator. |
| Cross traffic alert status-right | SODR | Input used to control the BLIS / CTA warning indicator. |
| Cruise control set speed display | PCM | Input used to control the cruise control set speed RTT indicator. |
| Cruise control status display | PCM | Input used to control the cruise control RTT indicator. |
| Door ajar status | BCM | Input used to control the door ajar indicator. |
| Driver seatbelt buckle status | RCM | Input used to control the seatbelt warning indicator. |
| Engine coolant temperature | PCM | Input used to control the engine coolant temperature indicator. |
| Engine oil life | PCM | Input used to control the engine oil change required RTT indicator. |
| Engine over-temperature indicator | PCM | Input used to control the engine coolant temperature indicator. |
| Engine oil pressure warning indicator | PCM | Input used to control the low engine oil pressure warning indicator. |
| Engine service required | PCM | Input used to control the powertrain malfunction (wrench) indicator. |
| Forward collision warning indicator request | IPMA | Input used to control the forward collision warning indicator. |
| Front fog lamp indicator status | BCM | Input used to control the front fog lamp on indicator. |
| High beam indicator request | BCM | Input used to control the high beam indicator. |
| Hood ajar status | BCM | Input used to control the door ajar indicator. |
| Ignition status | BCM | Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. |
| Lane keep assist system status display | IPMA | Input used to control the lane keep assist system indicator. |
| MIL request | PCM | Input used to control the MIL. |
| Outside air temperature display | HVAC module | Input used to provide the outside air temperature display. |
| Park brake (yellow) warning indicator request | ABS module | Input used to control the electric park brake function of the brake warning indicator. |
| Park lamp status | BCM | Input used to control the lights on indicator. |
| Parking brake warning indicator | BCM | Parking brake input used to control the brake warning indicator. |
| Selectable drive mode request | ABS module | Input used to control the selected drive mode RTT indicator. |
| Selectable drive mode status | ABS module | Input used to control the selected drive mode RTT indicator. |
| Side obstacle detect status - left | SODL | Input used to control the BLIS indicator. |
| Side obstacle detect status - right | SODR | Input used to control the BLIS indicator. |
| Side obstacle detect sensor status - left | SODL | Input used to control the BLIS indicator. |
| Side obstacle detect sensor status - right | SODR | Input used to control the BLIS indicator. |
| Stability/traction control indicator request | ABS module | Input used to control the stability/traction control indicator (sliding car icon). |
| Stability/traction control disabled indicator request | ABS module | Input used to control the stability/traction control disabled indicator (sliding car OFF icon). |
| Stop/start standby indicator | PCM | Input used to control the engine auto stop/start indicator when the engine shuts off. |
| TPMS indication request | BCM | Input used to control the TPMS indicator |
| Transmission service required | PCM | Input used to control the powertrain malfunction (wrench) indicator. |
| Turn indicator command | BCM | Input used to control the RH and LH turn indicators. |