LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Automatic Transmission - 10-Speed Automatic Transmission - 10R80 (Specifications - Diagnosis & Testing 3.5L DURATEC)) >> Diagnosis And Testing >> DTC Chart and Pinpoint Tests - 3.5L Duratec (202kW 275PS) >> Pinpoint Tests >> Pinpoint Test W: DTC P0751, P0756, P0761, P0766, P0771, P2707 >> Pinpoint Test W: DTC P0751, P0756, P0761, P0766, P0771, P2707

Pinpoint Test W: DTC P0751, P0756, P0761, P0766, P0771, P2707

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    The PCM monitors clutch applications. It sets a DTC in memory if a non electrical fault is detected for the clutch in question.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM P0751:00 Shift Solenoid 'A' Performance/Stuck Off: No Sub Type Information This DTC indicates a non-electrical fault that caused the A clutch to fail to apply. When this DTC is present, the failsafe logic disables all gears that use the A clutch, which allows only 7th through 10th gears.
    PCM P0756:00 Shift Solenoid 'B' Performance/Stuck Off: No Sub Type Information This DTC indicates a non-electrical fault that caused the B clutch to fail to apply. When this DTC is present, the failsafe logic disables all gears that use the B clutch, which allows only 3rd through 7th gears.
    PCM P0761:00 Shift Solenoid 'C' Performance/Stuck Off: No Sub Type Information This DTC indicates a non-electrical fault that caused the C clutch to fail to apply. When this DTC is present, the failsafe logic disables all gears that use the C clutch, which allows only reverse and 6th and 8th gears.
    PCM P0766:00 Shift Solenoid 'D' Performance/Stuck Off: No Sub Type Information This DTC indicates a non-electrical fault that caused the D clutch to fail to apply. When this DTC is present, the failsafe logic disables all gears that use the D clutch, which allows only 5th and 9th gears.
    PCM P0771:00 Shift Solenoid 'E' Performance/Stuck Off: No Sub Type Information This DTC indicates a non-electrical fault that caused the E clutch to fail to apply. When this DTC is present, the failsafe logic disables all gears that use the E clutch, which allows only reverse and 2nd, 4th and 10th gears.
    PCM P2707:00 Shift Solenoid 'F' Performance/Stuck Off: No Sub Type Information This DTC indicates a non-electrical fault that caused the F clutch to fail to apply. When this DTC is present, the failsafe logic disables all gears that use the F clutch, which allows only 1st through 3rd gears.

    Possible Causes 

    • Shift solenoid stuck off
    • Stuck control valve
    • Contamination in the main control
    • Clutch damaged
    • Faulty seal

  2. W1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition OFF.

    • Ignition ON.

    • Using a diagnostic scan tool, clear the PCM diagnostic trouble codes (DTCs).

    • Wait 10 seconds.

    • Road test the vehicle.

    • Using a diagnostic scan tool, carry out the PCM self-test.

    Are DTC P0751, P0756, P0761, P0766, P0771, P2707 present in the PCM ' 

    Yes  For DTC P0751, A clutch does not apply symptom, REFER to: A CLUTCH . For DTC P0756, B clutch does not apply symptom, REFER to: B CLUTCH . For DTC P0761, C clutch does not apply symptom, REFER to: C CLUTCH . For DTC P0766, D clutch does not apply symptom, REFER to: D CLUTCH . For DTC P0771, E clutch does not apply symptom, REFER to: E CLUTCH . For DTC P2707, F clutch does not apply symptom, REFER to: F CLUTCH .
    No  The fault is not present at this time and may be intermittent.
scientia non olet · About LEMON Manuals