Engine Oil Draining and Filling
WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
Special Tool(s) / General Equipment
| Oil Drain Equipment |
|---|
Draining
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: JACKING AND LIFTING - 3.5L DURATEC (202KW 275PS) 3.5L ECOBOOST (235KW 320PS)
-
- Remove the oil pan drain plug and drain the engine oil.Use the General Equipment: Oil Drain Equipment
- Install the oil drain plug.
Torque: 26 Nm
- Remove and discard the engine oil filter.Use the General Equipment: Oil Drain Equipment
Filling
-
- Lubricate the oil filter seal with clean engine oil and install and tighten in 2 stages.
- Stage 1: Install to initial gasket contact.
- Stage 2: Tighten 3/4 to 1 turn.
- Fill the engine with clean engine oil. Refer to: Engine Oil Draining and Filling