LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Ignition - 3.5L ECOBOOST (235KW/320PS)) >> Removal And Installation >> Ignition Coil-On-Plug >> Removal

Ignition Coil-On-Plug: Removal

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: When removing or installing the high-pressure fuel pump noise insulator, spreading the openings will reduce the risk of damage.

    Remove the high-pressure fuel pump noise insulator retainer. Remove the high-pressure fuel pump noise insulator.

    GFD838960Courtesy of FORD MOTOR COMPANY
  2. Disconnect the ignition coil-on-plug electrical connectors and the high-pressure fuel pump electrical connector.
    GFD839061Courtesy of FORD MOTOR COMPANY
  3. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
    NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

    Remove the ignition coil-on-plug mounting bolts and remove the ignition coil-on-plugs.

GFD839062Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals