Degas Bottle: Removal
WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
Release the cooling system pressure by slowly turning the degas bottle cap between 2 and 3 turns and remove the degas bottle cap.
- Using general tools, clamp the lower expansion tank hose and syphon the engine coolant from the expansion tank.Use the General Equipment: Fluid Suction GunUse the General Equipment: Locking Pliers
-
- Release the clamp and disconnect the coolant hose.Use the General Equipment: Hose Clamp Remover/Installer
- Depress the tabs and disconnect the coolant hose.
- Remove the bolts.
Torque: 8 Nm
- Position the degas bottle and release the clamp and disconnect the coolant hose.Use the General Equipment: Hose Clamp Remover/Installer