LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Electronic Engine Controls - 3.5L DURATEC (202KW/275PS)) >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation

Powertrain Control Module (PCM): Installation

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Upload the module information from the diagnostic tool using the Programmable Modules Installation routine. Refer to: Module Programming .

  3. NOTE: This step is only necessary when installing a new component.

    Carry out the Parameter Reset procedure. Refer to PASSIVE ANTI-THEFT SYSTEM (PATS) - VEHICLES WITH: KEYED IGNITION

  4. NOTE: This step is only necessary when installing a new component.

    Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.

scientia non olet · About LEMON Manuals